Whirlpool UCW 80 Instrukcja Obsługi Pobierz pdf (Strona 13)

ENGLISH 13

Problem Possiblecauses: Solutions:

The appliance does not

operate

There might be a problem

with the electric power

supply to the appliance.

Check that:

• there isn’t a power supply failure

• the power plug is correctly inserted in

the power socket and the two-pole

switch, if present, is in the correct

position (on)

• the electric circuit safety devices

installed in the house are fully functional

• the power supply cable is not broken

The inside LED light bulb

does not work.

The LED light bulb might

need replacing.

Disconnect the appliance from the

electric power supply, check the LED

light bulb and replace with a new one if

necessary (see “Daily use”).

The temperature inside

the compartments is not

cold enough.

There may be several

causes (see “Solutions”)

Check that:

• The doors are closed correctly

• The appliance is not placed near a heat

source.

• the temperature set is appropriate.

• Air circulation through the ventilation

grills at the bottom of the appliance is

not obstructed.

There is water at the

bottom of the refrigerator

compartment

The defrost water drain is

obstructed.

Clean the defrost water drain hole (see

“Cleaning and maintenance”).

The inside light ashes “Door open” alarm active.

It is activated when the

refrigerator compartment

door remains open for a

prolonged period of time.

To stop the alarm, close the refrigerator

door.

On reopening the door, check the light

works

Whattodoif...

Note:

Gurgling, hissing and humming noises from the refrigerating system are normal.

RemovetheLEDlightbulb

To remove the LED light bulb turn

anticlockwise as shown in gure.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

Whirlpool UCW 80 Instrukcja Obsługi Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Chłodnie Whirlpool UCW 80