Whirlpool AKL 702 IX Instrukcja Obsługi Pobierz pdf (Strona 7)

Installation instructions

Installation

Technical information for the

Installer

This cooking hob can be embedded in a worktop

20 to 50 mm thick.

If another appliance is not fitted under the

cooking hob, insert a separator panel, at a

distance of at least 90 mm from the cooking hob

bottom.

• If a vertical piece of furniture is installed, there

must be a gap of at least 100 mm between it

and the edge of the cooking hob.

Installation of cooking hob

• Apply the supplied gasket to the cooking hob

(unless it has already been fitted), after having

cleaned its surface as shown in the figure.

A - If the worktop is made out of wood, use the

springs supplied.

1. Fit the 4 springs into the relevant seat under

the box.

2. Make an opening in the worktop, respecting the

dimensions indicated in the enclosed product

description sheet.

3. Install the cooking hob in the worktop.

B - If the worktop is made out of marble or other

materials (plastics, ceramics or stone), the cooking

hob must be fixed by means of brackets , to be

ordered from the After-Sales Service (code 4819

310 18528).

1. Align the brackets with the bores and fix them

with the screws.

2. Make an opening in the worktop, respecting the

dimensions indicated in the product description

sheet.

3. Install the cooking hob in the worktop.

• Before installing the cooking hob, remove the

plastic film that protects it, if present.

• Installation must comply with current local

safety regulations.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Whirlpool AKL 702 IX Instrukcja Obsługi Strona 7