Whirlpool AKM 176/WH Instrukcja Obsługi Strona 7

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 7
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 6
17
INSTALLATION
Adjustment to different types of gas
If a different type of gas from the one indicated in the plate is
used, the cooking hob must be adapted to it.
1.
The gas nozzles must be changed by After-Sales Service or
a qualified technician.
Nozzles not supplied with the appliance must be ordered
from After-Sales Service.
2.
Connect the cooking hob to the gas shut-off valve by means
of a pipe suitable for the type of gas used, in compliance
with current local regulations.
3.
Adjust the minimum setting of the taps.
Note:
when liquid petroleum gas is used (G 30/G 31), the
minimum gas setting screws must be tightened as far as they
will go.
Replacing the injectors (see table in enclosed product
description sheet)
1.
Remove grids “
A
”.
2.
Extract burners “
B
”.
3.
Using a socket spanner of the appropriate size, “
C
”,
unscrew the injector to be replaced.
4.
Replace it with the injector suitable for the new type of gas.
5.
Re-assemble the injector in “
D
”.
6.
For models equipped with a triple crown burner, proceed as
shown in figure.
Remove the two screws “
F
” followed by the cap “
G
” then
replace both injectors “
D
” as previously described.
Replace the cap “
G
”, ensuring the seal is properly
positioned before attempting to use the cooktop.
7.
Before installing the cooktop, remember to affix the gas
calibration plate supplied with the injectors in such a way
that it covers the existing information relating to gas
calibration.
Adjusting minimum gas setting of taps
To ensure that the minimum setting is correctly adjusted,
remove knob “
E
” and proceed as follows:
tighten (-) to reduce the height of the flame;
loosen (+) to increase the height of the flame.
The adjustment must be performed with the tap in minimum gas
setting position (small flame) .
3gb66001.fm5 Page 17 Monday, November 12, 2001 3:00 PM
Przeglądanie stron 6
1 2 3 4 5 6 7

Komentarze do niniejszej Instrukcji

Brak uwag