Whirlpool CKH 472 Instrukcja Obsługi Pobierz pdf (Strona 3)

N C

M Y

INSTALLATION

Technical information for installation

The installation must be performed according to the

manufacturer’s instructions and in conformity with the

local regulations in force.

When fitting the hob in the unit remember that the

coatings of the walls of the unit or devices adjacent to

the hob must be heat resistant (“Y” protection against

heating according to standards EN 60335-2 6).

This hob can be built into a working surface 30 to 40

mm thick and 600 mm deep.

Before fitting the hob inside the unit, make sure that

the micro-switch box (A) has been fastened in place

(fig. 1) using the four screws supplied with the unit.

N.B.

– For correct installation refer to the assembly

instructions inside the unit.

– The micro-switch box (A) is a device which cuts the

power supply to the electric hotplates if the unit

door (B) is closed accidentally, thus preventing the

door being damaged by the excessive heat. It

should not be considered a hob safety device.

– The hob can only be used with the unit door (B)

completely open.

fig. 1

1 2 3 4 5 6 7

Brak uwag

Whirlpool CKH 472 Instrukcja Obsługi Strona 3