Whirlpool PIM 640 AS (BK) Instrukcja Obsługi Pobierz pdf (Strona 24)

555 mm

55 mm

475 mm

Hook fastening diagram

Hooking position Hooking position

for top H=20mm for top H=30mm

Front

Hooking position Back

for top H=40mm

! Use the hooks contained in the “accessory pack”.

• Where the hob is not installed over a built-in oven, a

wooden panel must be installed as insulation. This must

be placed at a minimum distance of 20 mm from the lower

part of the hob.

Ventilation



must be removed. It is advisable to install the oven so that it



with an opening of at least 45 x 560 mm (see diagrams).

560 mm.

45 mm.

Where a hob is installed above an oven without a forced

  

provided inside the cabinet by means of air holes through



!

above built-in ovens with a cooling ventilation system.

Electrical connection



designed to operate with alternating current at the voltage



on the lower part of the appliance). The earth wire in the

cable has a green and yellow cover. If the appliance is to

be installed above a built-in electric oven, the electrical

connection of the hob and the oven must be carried out

separately, both for electrical safety purposes and to make

extracting the oven easier.

Connecting the supply cable to the mains

Install a standardised plug corresponding to the load

indicated on the data plate.

The appliance must be directly connected to the mains

using an omnipolar circuit-breaker with a minimum contact

opening of 3 mm installed between the appliance and the

mains. The circuit-breaker must be suitable for the charge

indicated and must comply with current electrical regulations

(the earthing wire must not be interrupted by the circuit-

breaker). The supply cable must not come into contact with

surfaces with temperatures higher than 50°C.

! The installer must ensure that the correct electrical

connection has been made and that it is compliant with

safety regulations.

Before connecting to the power supply, make sure that:

• The appliance is earthed and the plug is compliant with

the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate.

• The voltage is in the range between the values indicated

on the data plate.

• The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it. Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 87 88

Komentarze do niniejszej Instrukcji

Brak uwag

Whirlpool PIM 640 AS (BK) Instrukcja Obsługi Strona 24

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Whirlpool PIM 640 AS (BK)