Whirlpool Automatic Ice Maker Instrukcja Użytkownika Strona 20

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 34
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 19
20
ON CYCLE
SECONDS
WATER VALVE
CONDENSER FAN
HOT GAS VALVE
WATER PUMP
COMPRESSOR
POWER ON START UP ONLY
120 12060 ICE MAKING HARVEST ICE BIN FULL *ICE BIN NOT FULL
OPERATION
>6.5°F <52°F <35°F >41°F
CLEAN CYCLE
SECONDS
WATER VALVE
CONDENSER FAN
HOT GAS VALVE
WATER PUMP
COMPRESSOR
LED
DIAGNOSTICS
5
CLEAN CYCLE
47 MINUTES
5 555
CYCLE CHARTS
* Return to Ice Making
Press CLEAN switch for diagnostic mode.
To exit Clean/Diagnostic Cycle press ON or OFF.
If a short or open thermistor is detected the LED will flash for 5 seconds before the Clean Cycle is
started.
THERMISTOR OPERATING PARAMETERS
EVAPORATOR THERMISTOR
ICE THICKNESS
NORMAL
THICK
THIN
CUT-IN
CUT-OUT
WATER VALVE OFF (during harvest)
Temperature
52.5°F ± .3°
52.5°F ± .3°
52.5°F ± .3°
Resistance
18.7k
±1%
18.7k
±1%
18.7k
±1%
Temperature
6.5°F ± .3°
4.5°F ± .3°
8.5°F ± .3°
Resistance
69.3k
±1%
73.5k
±1%
65.3k
±1%
Temperature
40°F ± .3°
40°F ± .3°
40°F ± .3°
Resistance
25.9k
±1%
25.9k
±1%
25.9k
±1%
ICE BIN THERMISTOR
BIN SHUT-OFF
Temperature
40°F ± 1°
Resistance
25.9k
±3%
Temperature
35°F ± 1°
Resistance
29.8k
±3%
If evaporator thermistor is not present or open, the electronic control will continue to make ice based
on time instead of temperature. (20 minutes for ice making and 3 minutes for harvest.)
The evaporator thermistor is clipped to the outlet tubing of the accumulator after the 180° bend.
Przeglądanie stron 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Komentarze do niniejszej Instrukcji

Brak uwag