Whirlpool ACM 930/1 WH Instrukcja Obsługi

4INSTRUCTIONS FOR USEINSTALLATION INSTRUCTIONSUSE AND MAINTENANCEBEFORE USING THE APPLIANCEPRECAUTIONS AND GENERAL ADVICEOVEN ACCESSORIESCLEANING AND

13USING ELECTRIC HOTPLATES (depending on the models)When using an electric hotplate for the first time or after a long period of disuse, turn the knob

14USE OF THE GAS GRILL (depending on the models)Manual ignition of the grillOpen the oven door, then turn the oven knob to the right and place it on t

15BEFORE USING THE APPLIANCE• Remove the accessories from the oven and heat it at 200°C for about two hours to eliminate the smell of protective greas

16PRECAUTIONS AND GENERAL ADVICE• The appliance is designed solely for domestic use for cooking food. No other use is allowed. The Manufacturer declin

17OVEN ACCESSORIES The accessories supplied depend on the model. The accessories provided with the oven are listed in the Product Description Sheet pr

18CLEANING AND MAINTENANCEWhen cleaning the cooker, do not shift it beyond the length of the tube.Disconnect the appliance from the power supply befor

19Removing the oven door:It should not be necessary to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. The

20TROUBLESHOOTING GUIDE1. The appliance does not work:• Check the mains power supply and that the appliance is electrically connected.• Switch the app

5INSTALLATION INSTRUCTIONSELECTRICAL CONNECTIONThis appliance must be earthed by law. Before connecting the appliance to the electrical supply, check

6This appliance is in Class 1.The appliance must be used with the gas specified on the appliance data plate located on the back cover (see details giv

7Gas adjustmentsUse pressure regulators that are suitable for the gas pressure values indicated in the Product Description Sheet supplied separately.I

8To change the oven injector, it is necessary to act as follows: open the oven door, remove the lower side of the oven (see Fig. 8), unscrew the screw

9REGULATION OF AIR ADJUSTER (oven burner)To do this,unscrew the screw (A) in order to rotate the metal ring at the end of the burner (Fig. 13).In this

10Oven minimum flame adjustmentLight the oven burner at max. setting.Close the door. Turn the knob to min. After approx. 20 minutes (at least to obtai

11InstallationImportant: The covering of the cabinets must be in heat resistant (min. 90°C) material.If the appliance is installed next to kitchen cab

12USE AND MAINTENANCEBe safe Please read the rest of the instruction book which contains important information to help you use the appliance safely an