Whirlpool WFC150MLAW0 Instrukcja Naprawy Pobierz pdf (Strona 3)

FOR SERVICE

TECHNICIAN

NOT

REMO

DESTRO

POUR

TECHNICIEN

SEULEMENT

AS ENLEVER

TRUIRE

PART

NO.

46197042905

PAGE

Date : 14-Feb-2008

MOTOR OVERHEATS

1. Check drive motor.

2. Unplug washer or disconnect power.

3. Check wire harness connections.

4. Check drive belt.

5. Plug in washer or reconnect power.

6. Check for obstruction between the spin basket and the outer tub.

WON'T DRAIN

1. Unplug washer or disconnect power.

2. Check wire harness connections.

3. Check drain pump.

4. Check drain pump motor.

5. Check that the drain hose and drain pump filter are clear of foreign objects.

6. Plug in washer or reconnect power.

7. Verify CCU operation by running a Quick Diagnostic Test or any cycle.

MACHINE VIBRATES

1. Remove shipping system.

2. Check installation.

3. Check leveling feet.

INCORRECT WATER

TEMPERATURE

1. Check that the inlet hoses are connected properly.

2. Unplug washer or disconnect power.

3. Check water temperature sensor for an abnormal condition. See the Water Temperature Sensor section, page 10.

4. Plug in washer or reconnect power.

5. Verify CCU operation by running a Diagnostic Test or any cycle.

DISPLAY FLASHING

See Failure/Error Display Codes.

DIAGNOSTIC TEST

The two test modes contain three modes of operation.

Test modes:

 Universal test mode, with additional user interface test at the beginning

 Quick test mode

Operation modes:

 User interface test

 Automated test

 Loads tests to assist in diagnosing potentially non-electrical issue

Starting Universal Test Mode

1. Close the door

2. Rotate the knob and select the CLEAN WASHER cycle. (See picture below)

1 2 3 4 5 6 7 8 ... 17 18

Komentarze do niniejszej Instrukcji

Brak uwag

Whirlpool WFC150MLAW0 Instrukcja Naprawy Strona 3

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kuchenki Whirlpool WFC150MLAW0