Whirlpool ACM 704/NE Instrukcja Obsługi Pobierz pdf (Strona 3)

Installation and fixing

WARNING

The installer is responsible for any damage

or injury resulting from incorrect

installation.

To guarantee correct operation, the appliance must be

installed on a perfectly flat surface.

For cut-out dimensions, see the figure below.

Forflush mounted installation or setting into a

marble worktop, contact the After-sales Service for the

installation kit and necessary instructions.

• 4812 310 19277 Installation kit for marble

worktop.

• 4801 211 00112 Installation kit for flush fitted

worktop.

To guarantee correct operation, the appliance must be

installed on a perfectly flat surface.

The worktop must be 20-50 mm thick.

If necessary, cut the kitchen unit and worktop to fit before

installing the hob. Clean the cutout of any remaining dust

that could compromise appliance operation.

If a column unit is installed adjacent to the hob, leave a

distance of at least 100 mm from the edge of the hob.

Assembly

1. Position the clips (A) in the spaces provided on the

hob trim (Fig. 3) if not already positioned.

2. Measure the centre point of the vertical sides of the

cut-out (Fig. 1)

3. Fit the brackets (C) in the centre of the vertical sides,

aligning the upper edge of the brackets so that they are

flush with the worktop surface (Fig. 2).

4. Fix the brackets with the 4 screws supplied (B) using

the holes provided.

5. Insert the hob in the cutout, making sure the clips (A)

are secured in the spaces provided (Fig. 4).

490

580

510

483

553

min. 50

770

483

510

742

R min. 6.5

max. 8

min. 50

560

490

R min. 6.5

max. 8

750

Dimensions in mm

Fig. 2

Fig. 1

1 2 3 4 5 6

Komentarze do niniejszej Instrukcji

Brak uwag

Whirlpool ACM 704/NE Instrukcja Obsługi Strona 3

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Whirlpool ACM 704/NE