12
Care and maintenance
Clean the hob after each use in order to avoid damaging
the surface and to prevent the formation of baked-on
deposits which are difficult to remove. Before cleaning,
make sure the cooking zones are switched off.
WARNING
• Do not use steam cleaners.
• Periodically check for dust under the
appliance, near the cooling air inlet and
the outlet openings. This could hinder the
ventilation and cooling of the electronic
system, thus decreasing hob efficiency.
To clean the hob, proceed as follows:
1. use a soft clean cloth, absorbent kitchen wipes or a
proprietary cleaner for glass ceramic hobs. Do not use
abrasive sponges and/or metal scouring pads.
2. Food spills should be cleaned off before they bake
onto the glass ceramic surface. Sugar and foods with a
high sugar content damage the glass ceramic surface
and must be immediately removed using a scraper for
glass.
Glass scrapers have a very sharp blade and must be
handled with care.
3. Remove any stubborn food residues with a scraper or
proprietary detergents.
4. Salt, sugar and sand can scratch the glass ceramic hob:
clean up any such spills on the hob immediately.
Troubleshooting guide
Before contacting After-sales Service:
• read and follow the instructions given in the section
“INSTRUCTIONS FOR USE”.
• Check that the electricity supply has not been shut off.
• Clean the hob and dry it thoroughly.
• Check that the knob is in the correct position: at
position “0” or the levels indicated by a continuous line,
the cooking zones do not receive any power
• If no pot is placed on the hob or if the pot used is not
suitable for an induction hob, the cooking zone selected
will switch off after 1 minute. To reactivate it: place a
pot that is suitable for the induction hob (see section
“Before use”) on the desired cooking zone, turn the
knob to “0” and then select the desired heat setting.
• If the internal temperature of electronic parts is too
high, the hob will switch off automatically. Wait for the
hob to cool down before using it again. To resume
operation, turn the knob to “0” and then to the desired
power level
After-sales Service
Before you call the After Sales Service:
• Try to solve the problem (see “Troubleshooting guide”).
• Switch the appliance off, wait 30 seconds then switch it
on again. to see if the fault persists.
If after the above checks the fault persists, contact the
nearest After-sales Service.
Always provide:
• a brief description of the fault,
• the exact type and model of hob;
• the service number (number after the word Service on
the rating plate) is located on the underside of the
cooktop or on the warranty booklet;
• your complete address and phone number.
If any repairs are required, please contact an authorized
After-sales Service as indicated in the warranty.
WARNING
failure to comply with these instructions
may compromise the safety and quality of
the product.
MAINTENANCE
(24 strony)
(11 strony)
(28 strony)
(178 strony)
(19 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji