Whirlpool AKM 280/IX Instrukcja Obsługi Pobierz pdf (Strona 7)

N C

M Y

INSTALLATION

OVEN/COOKTOP DIRECT GAS

CONNECTION

1. Slacken off the screws and position the

cooktop in such a way that the taps are

aligned with the oven knobs.

2. Adjust the height of the taps bracket

according to the position (2, 3, 4, 5) indicated

on the brackets

. Once adjusted to the

correct height, tighten the screws

.

3. Use the screws provided

to secure the

cooktop taps bracket

to the oven panel.

Fit the knobs.

Adjustment to different types

of gas

If a different type of gas from the one indicated

in the plate is used, the cooking hob must be

adapted to it.

1. The gas nozzles must be changed by After-

Sales Service or a qualified technician.

Nozzles not supplied with the appliance must

be ordered from After-Sales Service.

2. Connect the cooking hob to the gas shut-off

valvebymeansofapipesuitableforthetype

of gas used, in compliance with current local

regulations.

3. Adjust the minimum setting of the taps.

Note: when liquid petroleum gas G 30/G 31 is

used, the minimum gas setting screws must be

tightened as far as they will go.

Replacing the injectors (see table in

enclosed product description sheet)

1. Remove grids

.

2. Extract burners

.

3. Using a socket spanner of the appropriate size

unscrew the injector to be replaced.

4. Replace it with the injector suitable for the

new type of gas.

5. Re-assemble the injector in

.

Adjusting minimum gas setting

of taps

To ensure that the minimum setting is correctly

adjusted, remove knob and proceed as follows:

x tighten (-) to reduce the height of the flame;

x loosen (+) to increase the height of the flame.

The adjustment must be performed with the tap

in minimum gas setting position (small flame) .

58

58 GB 68461

1 2 3 4 5 6 7

Komentarze do niniejszej Instrukcji

Brak uwag