
5
Note: To reset the manual mode after each “automatic” cooking,
press the and buttons simultaneously.
Start delayed cooking with preset duration
The length of the cooking program as well as the time at which the
cooking program ends must be set. If we assume that the time
displayed on the timer is 10:00:
1. Turn the oven control knobs to the feature and temperature
desired (e.g. conventional oven, 200°C);
2. Press the button and then set the cooking time (within four
seconds) using the - and + buttons. Let us suppose that we set
the cooking time at 30 minutes. The display will read as follows:
A
After the button has been released, the current time will be
displayed again after approximately 4 seconds, along with the
symbol and the letter "A" (AUTO);
3. Press the button and then use the - and + buttons to set the
time for when the cooking program should end. Let us suppo-
se this time to be 1:00 p.m.
A
4. After the button has been released, the current time will be
displayed after approximately 4 seconds:
A
The letter "A" will light up reminding you that the length and end
cooking time were programmed in automatic mode. At this point,
the oven will turn on automatically at 12:30 and then turn off after
30 minutes. When the oven is turned on, the
symbol will be
displayed for the entire cooking time. At any time during the cooking
process, the length of the cooking time can be displayed by pressing
the
button, and the end cooking time by pressing the button.
After the cooking time has expired, the timer will ring for several
minutes; to turn it off, simply press any of the buttons except
the - and + buttons.
Immediate start with preset duration
By programming just the duration (points 1 and 2 of the “Start delayed
cooking with preset duration” section), cooking will start up
immediately.
To cancel a cooking schedule already programmed
Press the and buttons simultaneously.
Timer Feature
The timer feature allows you to enter a given amount of time from
which the timer begins to count down. This feature does not turn
the oven on or off; it merely sounds when the time has expired.
When the button has been pressed, the display will read as
follows:
Then use the - and + buttons to set the desired time. After the
button has been released, the timer will start to count down and the
current time will be displayed.
After the time has expired, an acoustical signal will be emitted,
which can be turned off by pressing any of the buttons (except the
- and + buttons) at this point the symbol will also turn off.
Correction/Cancellation of Data
• The data entered can be changed at any time by pressing the
corresponding button and the - and + buttons.
• When the data for the length of the cooking time is cancelled,
the data for the end cooking time are also cancelled
automatically, and vice versa.
• If the oven has been programmed, it will not accept end cooking
times which are before the start of the cooking process.
N.B.: Should the appliance be equipped with an electronic
programmer, to use the electric oven, just press buttons
and
at the same time (the
symbol will appear on the display)
before selecting the desired cooking function.
Cooling ventilation
In order to cool down the temperature of their exterior, some models
are fitted with a cooling fan that comes on when the programme se-
lector knob "G" is turned. In this case, the fan is always on and a
normal flow of air can be heard exiting between the oven door and
the control panel.
Note: when cooking is done, the fan stays on, even if knob
“G” is set to “0”, until the oven has cooled down sufficiently.
In "Fast cooking" mode, the fan comes on automatically only when
the oven is hot.
Once you have removed the food from the oven, we recommend
you leave the oven door ajar for a few minutes: this will drastically
reduce the duration of the cooling cycle. The process is controlled
by an additional thermostat and can consist of one or more cycles.
TIMER (ELECTRIC OVEN)
Komentarze do niniejszej Instrukcji