Whirlpool AGS 840/WP Instrukcja Instalacji

1 WHIRLPOOL (R404a) TECHNICAL SERVICE MANUAL ICE CUBE MAKERS MODELS: WHIRLPOOL AGS 836/837 WHIRLPOOL AGS 838/839 WHIRLPOOL AGS 840/841 WHIR

10PRODUCTION TABLES FOR ICE CUBE MAKERS (KG/DAY) WHP AGS 836/837 WHP AGS 838/839 45 25 22 27 20 28 19.5 29 19

11 WHP AGS 848/849 WHP AGS 850/851 45 24 99 26 92 28 85 29 81 30 79 31 77 32 74 19.5 151 20 143 21 138 23

12DELIVERY & UNPACKING Upon receipt, thoroughly inspect the packing container. If there appears to be damage to the container contact the shipper

13INSTALLATION The ice cube maker is delivered on a small wooden pallet and is protected with a cardboard box and packaging. Loosen the cardboard box

14access to condenser and/or water pressure valve, allow sufficient space at front of the machine. Be sure that flooring is firm and even. Water and

15• It is recommended to install a switch and adequate fuses. Nominal voltage and intensity are indicated on rating plate as well as on this manual&a

16OPERATION Preliminary Check a) Is machine levelled? b) Are voltage and frequency of main supply the same as indicated on rating plate? c) Is draina

17ADJUSTMENTS Condenser water valve pressostat (UP TO WHP AGS 841 WATER COOLED) This pressostat controls high pressure by opening and closing the co

18Pressure Control Fan pressostat (air condensation) Pressure Control operates on high pressure by starting and/stopping fan. Differential is fixe

19MAINTENANCE AND CLEANING INSTRUCTIONS IMPORTANT! **Maintenance and cleaning procedures as well as problems derived from failing to carry them out

2TABLE OF CONTENTS Introduction Warnings...

20MAINTENANCE AND CLEANING PROCEDURES WARNING: Unit should always be disconnected during maintenance/cleaning procedures. Water Condenser 1) Disconn

213) Hold agitator paddles so that water pan releases water. 4) Once the water pan returns to its horizontal position again, switch off the machin

22 Checking for water leaks This must be done whenever maintenance is carried out on the machine: check all water connections, braces, tubes and hos

23TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTION 1) None of the electrics work. A) The machine is not plugged in. A) Plug the machine. B) T

24 PROBLEM POSSIBLE CAUSES SOLUTION 4) Everything appears to be running correctly but no ice made in the evaporator. A) Freezing system faulty. (

25 PROBLEM POSSIBLE CAUSES SOLUTION 11) Pan does not free cubes or remains in am intermediary position. A) Cam motor disconnected or in bad conditio

3INTRODUCTION Thank you for choosing Whirlpool ice cube makers. You have purchased one of the most reliable ice-making products on the market today.

4DESCRIPTION The ice cubes maker is the result of years of experience in this field and the development of a high technology factory. Main Features

5 WHIRLPOOL

6 WHIRLPOOL AGS

7SPECIFICACIONS Models: WHIRLPOOL AGS 836….849 * HEIGHT Z REPRESENTS MINIMUM MACHINE HEIGHT. IF LEGS ARE PLACED UNDER MACHINE, THEN ADD AN

8 STOCK THERMOSTAT WATER INLET ELECTRICAL CONNECTION WHIRLPOOL AGS 850-851

9TECHNICAL DATA MODEL COOLING WATER USAGE L/HOUR (1) ICE PRODUCTION WATER USAGE L/HOUR (1) TOTAL WATER USAGE L/HOUR (1) NET WEIGHT (KG) DIMEN