Whirlpool KHRT 7710/I Instrukcja Obsługi Pobierz pdf (Strona 5)

Installation

A) If the work top is made of wood, use the appropriate brackets,

spring clips and screws provided.

• Position the 4 clips (A) around the cooktop frame, in the slots

provided. See Fig. 1.

• Measure the centre of the vertical sides of the cut-out as shown in

Fig. 2.

• Position the centre of the brackets (C) on the centre of the side

previously identified.

• The upper edge of the brackets must be flush with the work top

surface.

• Secure using the 4 screws (B) provided that should screw into the

pre-prepared holes.Insert the hob in the pre-prepared hole so

that the clips (A) lodge into the bracket holes provided (C Fig. 4

and 5).

B) If the work top is made of marble or other materials

(plastic, ceramic tile, stone etc.), the cooktop must be fitted

with code no. 4819 310 1852 brackets (to be ordered from the

Customer Care Department).

• Fit the cooktop into the worktop.

• Use the brackets (C) by positioning them as shown in the diagram

according to the thickness of the worktop.

• Tighten the screws (E) into the holes (D).

Installation

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Top min. 20

Top max. 50

501971902072_GB 12-11-2007 11:14 Pagina 5

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Whirlpool KHRT 7710/I Instrukcja Obsługi Strona 5