Whirlpool PPF 73 G Instrukcja Obsługi Pobierz pdf (Strona 14)

Before fastening the cooktop in place, position the

seal (supplied) along the perimeter of the countertop,

as shown in the figure 2.

Clamps are provided to fasten the cooktop to

counters measuring from 20 to 40 mm in thickness.

To fasten the cooktop securely, it is recommended

that all the clamps be used.

Fastening Clamps - Assembly Diagram

Clamp Position for Clamp Position for

H=30mm top H=40mm top

Front

Clamp Position for

H=20mm top Back

N.B: Use the clamps contained in the "accessory

kit."

Hobs installation (mod. PPF... - PP..SF)

Before fastening the cooktop in place, position the

seal (supplied) along the perimeter of the countertop,

as shown in the figure 3.

Fig.3

An insulating wooden panel should be fitted beneath

the hob, positioned at a minimum of 20 mm from the

hob underside. This wooden panel must be

removable in order to allow for any maintenance

operations beneath the hob.

Installing flush-fitted hobs (mod. PPF...)

To slot in the hob flush with the worktop, it is

necessary to lower the area just outside the cut-out

for the hob as illustrated in figure 4.

Installing semi-flush hobs (mod. PP..SF)

To create the recess necessary for semi-flush hobs, drill

into the top as illustrated in figure 5.

2.5

Fig.4 Fig. 5

Fig. 2

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Brak uwag

Whirlpool PPF 73 G Instrukcja Obsługi Strona 14