Whirlpool AWE 8723 Instrukcja Obsługi Pobierz pdf (Strona 12)

GB 12

Appliance exterior and control panel

•

Clean using normal household cleaner (do not

use abrasive products).

•

Wipe with a soft cloth.

Door seal

•

Clean from time to time with a damp cloth.

Water inlet hose(s)

•

Check the hose regularly for brittleness and

cracks. Replace if necessary.

TROUBLESHOOTING GUIDE

This washing machine is equipped with automatic

safety functions which detect and diagnose faults at

an early stage and allow you to react appropriately.

Often, however, the faults detected are small

enough to be solved in a matter of minutes.

For example:

The appliance will not start, no lamp

lights up.

Check whether:

•

the appliance is plugged in;

•

the wall socket is functioning correctly

(use a table lamp or similar);

•

a programme is selected correctly.

The appliance will not start, but the

“Start/Pause” lamp is flashing.

Check whether:

•

the programme has been changed;

•

the appliance door is properly shut. Open and

shut it again.

The appliance stops during the programme.

Check whether:

•

the

“Rinse Hold”

lamp is on, terminate this

option by pressing the button again;

•

another programme has been selected.

reselect the desired programme and press the

“Start/Pause”

button;

•

the

“Start/Pause”

lamp is flashing. Press the

“Start/Pause”

button;

•

the safety system of the appliance was activated.

See fault description table.

Detergent and additive product residues

in dispenser at end of wash.

Check whether:

•

the detergent dispenser is properly installed and

is not blocked (see “Care and maintenance”);

•

the foreign body trap in the water inlet hose is

not blocked (see “Care and maintenance”).

The appliance vibrates during the spin

cycle.

Check whether:

•

the appliance is level and that all the feet are

adjusted (see “Installation”);

•

the transport bracket has been removed. Before

starting up the appliance, the transport screws

and the transport bracket MUST be removed

(see “Installation”).

Final spin results are poor.

Check whether:

•

the pump impeller is obstructed (see “Cleaning

the foreign body trap”).

•

if the laundry is still too wet at the end of the

programme: possibly add other items of clothing

and repeat the spin cycle.

•

there is foam on the washing: repeat a rinse-spin

cycle and avoid excessive quantities of detergent.

Note:

The appliance has an imbalance detection and

correction system. If individual heavy items are

loaded (a bathrobe, for example), this system may

reduce the spin speed automatically or interrupt

the spin if it detects too great an imbalance at the

start of the spin, in order to protect the appliance.

Excessive foam formation may also prevent

spinning.

3gb10243.fm Page 12 Thursday, March 11, 2004 7:36 PM

Black process 45.0° 100.0 LPI

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Komentarze do niniejszej Instrukcji

Brak uwag

Whirlpool AWE 8723 Instrukcja Obsługi Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pralki Whirlpool AWE 8723