Whirlpool TIG 7624 (MI) 400(T) Instrukcja Obsługi Pobierz pdf (Strona 24)

Maintenance and care

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents (for

example, spray cans for cleaning barbecues and

ovens), stain removers, anti-rust products, powder

detergents or sponges with abrasive surfaces: these

may scratch the surface.

! Never use steam cleaners or pressure cleaners on

the appliance.

 It is usually enough to wash the hob with a damp

sponge and dry it with absorbent kitchen roll.

 If the hob is particularly dirty, rub with a special

glass ceramic cleaning product, rinse and dry.

 To remove more stubborn dirt, use the scraper

provided. Remove spills as soon as possible,

without waiting for the appliance to cool, to avoid

residues forming crusty deposits. You can obtain

excellent results by using a rust-proof steel wire

sponge - specifically designed for glass ceramic

surfaces - soaked in soapy water.

! The scraper provided is sharp: be careful when

using it.

 If the plastic or sugary substances are accidentally

melted on the hob, remove them immediately with

the scraper, while the surface is still hot.

 Once it is clean, the hob may be treated with a

special maintenance and protection product: the

invisible film left by this product protects the

surface from drips during cooking. This should be

done while the appliance is warm or cold.

 Always remember to rinse the appliance with clean

water and dry the hob thoroughly: residues can

become encrusted during cooking.

Stainless steel frame

(only in models with outer frame)

Rust-proof steel can be marked by hard water that has

been left on the surface for a long time, or by cleaning

products containing phosphorus. After cleaning, it is

advisable to rinse the surface well and dry it

thoroughly. If water is spilt on the surface, dry it

quickly and thoroughly.

! Frame made of aluminum with an aspect steel. Dont

use products of cleaning and spot remover forbidden

for aluminium.

Removing the hob

If it is necessary to remove the hob:

1. loosen the screws fixing the alignment springs on each

side;

2. loosen the screws holding the fixing hooks in each

corner;

3. take the hob out of its installation cavity.

! Do not attempt to repair the appliance yourself.

If the appliance breaks down, contact a Service

Centre.

Cookeye® Maintenance

 Clean the Cookeye® regularly with a damp sponge

that has been soaked in washing up liquid and dry

it with absorbent kitchen roll or a dry cloth.

 Make sure the lens is always clean. If there are

spots of grease on it, clean it with a cotton bud

soaked in non-abrasive, non-corrosive glass

cleaner.

 Do not wash the Cookeye® under running water or

in the dishwasher.

Changing the Clipso Eye batteries

The life span of the Clipso Eye batteries depends on

the frequency of its use. As soon as you notice Clipso

Eye is not working as it should, remove the batteries

and change them (reference LR54). To take out the

batteries, open the compartment with a coin (see

picture).

! The two batteries are

alkaline manganese and

contain mercury: as

soon as they have been

changed, put the old

batteries in a specific

collection container.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag

Whirlpool TIG 7624 (MI) 400(T) Instrukcja Obsługi Strona 24

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Whirlpool TIG 7624 (MI) 400(T)